Bill Gates Biography - Profile

Bill Gates Biography (William Henry Gates III): Microsoft Founder
Famous for : Being the richest man in the world, a cofounder of the software company Microsoft, and for being one of the world's most generous philanthropists.
Gates details : Born - USA October 28, 1955 Lives - United States of America

Bill Gates is one of the most influential people in the world. He is cofounder of one of the most recognized brands in the computer industry with nearly every desk top computer using at least one software program from Microsoft. According to the Forbes magazine, Bill Gates is the richest man in the world and has held the number one position for many years.

Gates was born and grew up in Seattle, Washington USA. His father, William H. Gates II was a Seattle attorney and his mother, Mary Maxwell Gates was a school teacher and chairperson of the United Way charity. Gates and his two sisters had a comfortable upbringing, with Gates being able to attend the exclusive secondary "Lakeside School".

Bill Gates started studying at Harvard University in 1973 where he met up with Paul Allen. Gates and Allen worked on a version of the programming language BASIC, that was the basis for the MITS Altair (the first microcomputer available). He did not go on to graduate from Harvard University as he left in his junior year to start what was to become the largest computer software company in the world; Microsoft Corporation.

Bill Gates and the Microsoft Corporation
"To enable people and businesses throughout the world to realize their full potential." Microsoft Mission Statement
After dropping out of Harvard Bill Gates and his partner Paul Allen set about revolutionizing the computer industry. Gates believed there should be a computer on every office desk and in every home.

In 1975 the company Micro-soft was formed, which was an abbreviation of microcomputer software. It soon became simply "Microsoft"® and went on to completely change the way people use computers.

Microsoft helped to make the computer easier to use with its developed and purchased software, and made it a commercial success. The success of Microsoft began with the MS-DOS computer operating system that Gates licensed to IBM. Gates also set about protecting the royalties that he could acquire from computer software by aggressively fighting against all forms of software piracy, effectively creating the retail software market that now exists today. This move was quite controversial at the time as it was the freedom of sharing that produced much innovation and advances in the newly forming software industry. But it was this stand against software piracy, that was to be central in the great commercial success that Microsoft went on to achieve.

Bill Gates retired as Microsoft CEO in 2008.

Bill Gates Criticism
With his great success in the computer software industry also came many criticisms. With his ambitious and aggressive business philosophy, Gates or his Microsoft lawyers have been in and out of courtrooms fighting legal battles almost since Microsoft began.

The Microsoft monopoly sets about completely dominating every market it enters through either acquisition, aggressive business tactics or a combination of them. Many of the largest technology companies have fought legally against the actions of Microsoft, including Apple Computer, Netscape, Opera, WordPerfect, and sun Microsystems.

Bill Gates Net Worth
With an estimated wealth of $53 billion in 2006, Bill Gates is the richest man in the world and he should be starting to get used to the number spot as he has been there from the mid-ninties up until now. The famous investor Warren Buffett is gaining on Gates though with an estimated $46 billion in 2006.

Microsoft hasn't just made Bill Gates very wealthy though. According to the Forbes business magazine in 2004 Paul Allen, Microsoft cofounder was the 5th richest man in the world with an estimated $21 billion. While Bill Gates' long time friend and Microsoft CEO, Steve Ballmer was the 19th richest man in the world at $12.4 billion.

See more information the Bill Gates Net Worth page.

Bill Gates Philanthropy
Being the richest man in the world has also enabled Gates to create one of the world's largest charitable foundations. The Bill and Melinda Gates Foundation has an endowment of more than $28 billion, with donations totaling more than $1 billion every year. The foundation was formed in 2000 after merging the "Gates Learning Foundation" and "William H. Gates Foundation". Their aim is to "bring innovations in health and learning to the global community".

Bill Gates continues to play a very active role in the workings of the Microsoft Company, but has handed the position of CEO over to Steve Ballmer. Gates now holds the positions of "Chairman" and "Chief Software Architect". He has started that he plans to take on fewer responsibilities at Microsoft and will eventually devote all his time to the Bill & Melinda Gates Foundation.

In 2006, the second richest man in the world, Warren Buffett pledged to give much of his vast fortune to the Bill and Melinda Gates Foundation.

Bill Gates Receives a KBE
In March 2005 William H. Gates received an "honorary" knighthood from the queen of England. Gates was bestowed with the KBE Order (Knight Commander of the Most Excellent Order of the British Empire) for his services in reducing poverty and improving health in the developing countries of the world.
After the privately held ceremony in Buckingham Palace with Her Majesty Queen Elizabeth II, Gates commented on the recognition..
"I am humbled and delighted. I am particularly pleased that this honor helps recognize the real heroes our foundation (Bill and Melinda Gates Foundation) supports to improve health in poor countries. Their incredible work is helping ensure that one day all people, no matter where they are born, will have the same opportunity for a healthy life, and I'm grateful to share this honor with them."

The KBE Order of the British Empire is the second highest Order given out, but it is only an honorary knighthood as only citizens that are British or a part of the Commonwealth receive the full Order. This means that Gates does not become Sir Bill Gates.

Bill Gates lives near Lake Washington with his wife Melinda French Gates and their three children. Interests of Gates include reading, golf and playing bridge.



This Bill Gates biography may not be reproduced online.
Copyright © Woopidoo.com

Barack Obama

aka Barack Hussein Obama, Jr.

(1961–)

In the News: President Barack Obama sought to reassure Americans in his State of the Nation address to Congress on Tuesday (February 24, 2009). While Obama was careful to include a sober assessment of the country's grim economic situation and his plans to fix it, he also made sure that recession-weary Americans knew to expect better days ahead.

"While our economy may be weakened and our confidence shaken, though we are living through difficult and uncertain times, tonight I want every American to know this: We will rebuild, we will recover," Obama, said in his televised speech to Congress, where Democrats control both chambers. "And the United States of America will emerge stronger than before," he said to the packed audience.

Doubtful Wall Street investors, who sent U.S. stocks to a 12-year low on Monday, rallied on Tuesday after Obama's speech. The Federal Reserve Chairman Ben Bernanke assured that the country's troubled banks should be able to weather the downturn without being nationalized.

Biography: Barack Hussein Obama was born Aug. 4, 1961, in Honolulu, Hawaii. His father, Barack Obama, Sr., was born of Luo ethnicity in Nyanza Province, Kenya. He grew up herding goats with his own father, who was a domestic servant to the British. Although reared among Muslims, Obama, Sr., became an atheist at some point.

Obama’s mother, Ann Dunham, grew up in Wichita, Kansas. Her father worked on oil rigs during the Depression. After the Japanese attack on Pearl Harbor, he signed up for service in World War II and marched across Europe in Patton’s army. Dunham’s mother went to work on a bomber assembly line. After the war, they studied on the G. I. Bill, bought a house through the Federal Housing Program, and moved to Hawaii.

Meantime, Barack’s father had won a scholarship that allowed him to leave Kenya pursue his dreams in Hawaii. At the time of his birth, Obama’s parents were students at the East–West Center of the University of Hawaii at Manoa.

Obama’s parents separated when he was two years old and later divorced. Obama’s father went to Harvard to pursue Ph. D. studies and then returned to Kenya.

His mother married Lolo Soetoro, another East–West Center student from Indonesia. In 1967, the family moved to Jakarta, where Obama’s half-sister Maya Soetoro–Ng was born. Obama attended schools in Jakarta, where classes were taught in the Indonesian language.

Four years later when Barack (commonly known throughout his early years as "Barry") was ten, he returned to Hawaii to live with his maternal grandparents, Madelyn and Stanley Dunham, and later his mother (who died of ovarian cancer in 1995).

He was enrolled in the fifth grade at the esteemed Punahou Academy, graduating with honors in 1979. He was only one of three black students at the school. This is where Obama first became conscious of racism and what it meant to be an African–American.

In his memoir, Obama described how he struggled to reconcile social perceptions of his multiracial heritage. He saw his biological father (who died in a 1982 car accident) only once (in 1971) after his parents divorced. And he admitted using alcohol, marijuana and cocaine during his teenage years.

After high school, Obama studied at Occidental College in Los Angeles for two years. He then transferred to Columbia University in New York, graduating in 1983 with a degree in political science.

After working at Business International Corporation (a company that provided international business information to corporate clients) and NYPIRG, Obama moved to Chicago in 1985. There, he worked as a community organizer with low-income residents in Chicago’s Roseland community and the Altgeld Gardens public housing development on the city’s South Side.

Double your Firefox speed in just five minutes

Firefox has been outperforming IE in every department for years, and version 3 is speedier than ever.

But tweak the right settings and you could make it faster still, more than doubling your speed in some situations, all for about five minutes work and for the cost of precisely nothing at all. Here’s what you need to do.

1. Enable pipelining

Browsers are normally very polite, sending a request to a server then waiting for a response before continuing. Pipelining is a more aggressive technique that lets them send multiple requests before any responses are received, often reducing page download times. To enable it, type about:config in the address bar, double-click network.http.pipelining and network.http.proxy.pipelining so their values are set to true, then double-click network.http.pipelining.maxrequests and set this to 8.

Keep in mind that some servers don’t support pipelining, though, and if you regularly visit a lot of these then the tweak can actually reduce performance. Set network.http.pipelining and network.http.proxy.pipelining to false again if you have any problems.

2. Render quickly

Large, complex web pages can take a while to download. Firefox doesn’t want to keep you waiting, so by default will display what it’s received so far every 0.12 seconds (the “content notify interval”). While this helps the browser feel snappy, frequent redraws increase the total page load time, so a longer content notify interval will improve performance.

Type about:config and press [Enter], then right-click (Apple users ctrl-click) somewhere in the window and select New > Integer. Type content.notify.interval as your preference name, click OK, enter 500000 (that’s five hundred thousand, not fifty thousand) and click OK again.

Right-click again in the window and select New > Boolean. This time create a value called content.notify.ontimer and set it to True to finish the job.

3. Faster loading

If you haven’t moved your mouse or touched the keyboard for 0.75 seconds (the content switch threshold) then Firefox enters a low frequency interrupt mode, which means its interface becomes less responsive but your page loads more quickly. Reducing the content switch threshold can improve performance, then, and it only takes a moment.

Type about:config and press [Enter], right-click in the window and select New > Integer. Type content.switch.threshold, click OK, enter 250000 (a quarter of a second) and click OK to finish.

4. No interruptions

You can take the last step even further by telling Firefox to ignore user interface events altogether until the current page has been downloaded. This is a little drastic as Firefox could remain unresponsive for quite some time, but try this and see how it works for you.

Type about:config, press [Enter], right-click in the window and select New > Boolean. Type content.interrupt.parsing, click OK, set the value to False and click OK.

5. Block Flash

Intrusive Flash animations are everywhere, popping up over the content you actually want to read and slowing down your browsing. Fortunately there’s a very easy solution. Install the Flashblock extension (flashblock.mozdev.org) and it’ll block all Flash applets from loading, so web pages will display much more quickly. And if you discover some Flash content that isn’t entirely useless, just click its placeholder to download and view the applet as normal.

6. Increase the cache size

As you browse the web so Firefox stores site images and scripts in a local memory cache, where they can be speedily retrieved if you revisit the same page. If you have plenty of RAM (2 GB of more), leave Firefox running all the time and regularly return to pages then you can improve performance by increasing this cache size. Type about:config and press [Enter], then right-click anywhere in the window and select New > Integer. Type browser.cache.memory.capacity, click OK, enter 65536 and click OK, then restart your browser to get the new, larger cache.

7. Enable TraceMonkey

TraceMonkey is a new Firefox feature that converts slow Javascript into super-speedy x86 code, and so lets it run some functions anything up to 20 times faster than the current version. It’s still buggy so isn’t available in the regular Firefox download yet, but if you’re willing to risk the odd crash or two then there’s an easy way to try it out.

Install the latest nightly build (ftp://ftp.mozilla.org/pub/firefox/nightly/latest-trunk/), launch it, typeconfig in the address bar and press Enter. Type JIT in the filter box, then double-click javascript.options.jit.chrome and javascript.options.jit.content to change their values to true, and that’s it - you’re running the fastest FirefoxJavascript engine ever. about:

8. Compress data

If you’ve a slow internet connection then it may feel like you’ll never get Firefoxweb traffic through its own server, compressing it at the same time, so there’s much less to download. And it can even compress JPEGs by allowing you to reduce their quality. This all helps to cut your data transfer, useful if you’re on a limited 1 GB-per-month account, and can at best double your browsing performance. to perform properly, but that’s not necessarily true. Install toonel.net (toonel.net) and this clever Java applet will re-route your

6 Gmail Tips

Are you a power Gmail user? If not, these 6 little known, yet useful Gmail tips can get you on the road to being a power Gmail user today!

1. Import your contacts from Outlook, Thunderbird or Yahoo! Mail to Gmail. Don’t spend your entire weekend trying to copy your contacts over from another program or service! Just export your contacts as a .csv file and upload to Gmail. You can upload up to 3,000 contacts at a time. Here’s a detailed how-to on importing contacts using this method.

2. Use the vacation responder to automatically send messages to contacts. You do not have to be on vacation in order to use the vacation responder. If I am facing a deadline and too busy to talk, I will set up my vacation responder to let people know that I appreciate their email and I will get back to them within a certain timeframe. This sets the expectation for them that I am not ignoring them and I will get back to them soon. My coworkers, family and friends appreciate it. You could also use the vacation responder to send “update” messages while you are away on vacation change the message and let people know how much fun you are having!

3. Save time when sending messages to groups by creating groups in your contacts list. Stop typing in the first few letters of the name or email address of 20 different people that you send those neat and crazy forwards to every day! Just create a group called “Forwards” and add them to the group. Now, you can just type “Forwards” and Gmail will do the rest. Check out the details for specific instructions on how to create groups within Gmail contacts.

4. Mute conversations that are either out of hand or you aren’t interested in. My family and friends “group email” each other all day, every day. Sometimes, the topic is nothing I want to talk about or have an interest in, so pressing “m” on my keyboard allows me to mute the conversation. All subsequent emails are automatically archived, and search-able by searching for “is:muted”. Filters still apply and you can unmute a conversation if you want to join in later.

5. Update your Web Clips to show your favorite RSS feeds and news clips right above your Gmail inbox. Gmail has many options available under the Settings menu, but you can add your own urls, too. The clips are shown randomly, and they are also clickable, so you can visit a blog directly from your email inbox or read up on some interesting news without typing in the URL everytime.

6.Create filters with multiple actions, to save time and keep your inbox clear. You have several options available to you, so use them! Coupled with the label system, you can create all types of filters that will make it easier to manage your incoming and existing mail. And you can also modify Gmail filters if you find it necessary.

How to configure Gmail on Microsoft Outlook

The following steps will explain about configuring gmail on Microsoft Outlook. First you have to enable POP for gmail Email ID.

Enabling POP

You can retrieve your Gmail messages with a client or device that supports POP, like Microsoft Outlook or Netscape Mail.

To enable POP in Gmail:

1. Sign in to Gmail.

2. Click Settings at the top of any Gmail page.

3. Click Forwarding and POP/IMAP.

4. Select Enable POP for all mail or Enable POP for mail that arrives from now on.

5. Choose the action you’d like your Gmail messages to take after they are accessed with POP.

6. Configure your POP client* and click Save Changes.

Follow the instructions below to set up POP access in Outlook 2007

To configure Outlook 2007 for your Gmail address:

1. Enable pop , Don’t forget to click Save Changes when you’re done.

2. Open Outlook.

3. Click the Tools menu, and select Account Settings…

4. On the E-mail tab, click New…

5. If you are prompted to Choose E-mail Service, select Microsoft Exchange, POP3, IMAP, or HTTP, and click Next.

6. Fill in all necessary fields to include the following information:Your Name: Enter your name as you would like it to appear in the From: field of outgoing messages.

Email Address: Enter your full Gmail email address (username@gmail.com). Google Apps users, enter your full address in the format username@your_domain.com.

Password: Enter your email password.

Manually configure server settings or additional server types: Leave this option unchecked if you want to automatically configure Outlook 2007. If you want to manually configure Outlook 2007, check this box now. Google Apps users should configure manually as follows.

7. Click Next. If you are configuring Outlook 2007 automatically, you’re done! Just click Finish.

8. If you are configuring Outlook 2007 manually, select Internet E-mail and click Next.

9. Verify your User Information, and enter the following additional information:Server Information.

Account Type: POP3

Incoming mail server: pop.gmail.com (Google Apps users, enter the server names provided, don’t add your domain name in these steps)

Outgoing mail server (SMTP): smtp.gmail.com

Logon Information

User Name: Enter your Gmail username (including @gmail.com). Google Apps users, enter your full address in the format username@your_domain.com

Password: Enter your email password.

Require logon using Secure Password Authentication (SPA): Leave this option unchecked.

10. Click the More Settings… button, and select the Outgoing Server tab.

11. Check the box next to My outgoing server (SMTP) requires authentication and select Use same settings as my incoming mail server.

12. Click the Advanced tab, and check the box next to This server requires an encrypted connection (SSL) under Incoming Server (POP3).

13. In the Outgoing server (SMTP) box, enter 587, and select TLS from the drop-down menu next to Use the following type of encrypted connection:

14. Click OK.

15. Click Test Account Settings… After receiving ‘Congratulations! All tests completed successfully’, click Close.

16. Click Next, and then click Finish.

The fastest way to open a local file in Google Docs

What I really want to do is add a link to Google Docs on the right-click (context) menu in Windows Explorer. That way, I could open a file in Google Docs by right-clicking it in Explorer and choosing Send To > Google Docs.

Well, I wasn’t able to figure out how to do this. So instead, I created a shortcut to open Google Docs, and then I browsed to the file and opened it the old-fashioned way.

This won’t save you a lot of time, but at least Google Docs makes it easy for you to transmit the file to the service as an e-mail attachment. And, of course, you can send the file to other e-mail recipients at the same time.

To create the shortcut to Google Docs, log in to the service, copy the URL in the address bar, right-click the desktop or any folder window, choose New > Shortcut, paste the URL in the Location field, click Next, type Google Docs (or the name of your choice), and press Enter (or click Finish).

Now navigate to the shortcut you just created, right-click it, and choose Properties. Click in the “Shortcut key” box, and type your preferred keyboard shortcut (I chose Ctrl-Alt-G).

Now you can open the service by pressing the keyboard shortcut you just entered. Once it opens, choose Upload in the top-left corner of the window, browse to and select the file, give it a name (or use the existing file name), and click Upload File.

Alternatively, you can copy the unique e-mail address Google Docs generated for you under E-mail Your Documents and Files, open your e-mail program, paste the address in the To: field, and add any other recipients you want to send the file to. The file will be attached to the message automatically.

Google Docs limits your HTML and text files (including Word’s .doc and .rtf) to 500KB, presentations to 10MB from your computer, and 2MB from a Web site (500KB as e-mail attachments), and spreadsheets to 1MB (spreadsheets can’t be uploaded as e-mail attachments).

The fastest way to open a local file in Google Docs

What I really want to do is add a link to Google doc on the right-click (context) menu in Windows Explorer. That way, I could open a file in Google doc by right-clicking it in Explorer and choosing Send To > Google doc.

Well, I wasn’t able to figure out how to do this. So instead, I created a shortcut to open Google doc, and then I browsed to the file and opened it the old-fashioned way.

This won’t save you a lot of time, but at least Google doc makes it easy for you to transmit the file to the service as an e-mail attachment. And, of course, you can send the file to other e-mail recipients at the same time.

To create the shortcut to Google doc, log in to the service, copy the URL in the address bar, right-click the desktop or any folder window, choose New > Shortcut, paste the URL in the Location field, click Next, type Google doc (or the name of your choice), and press Enter (or click Finish).

Now navigate to the shortcut you just created, right-click it, and choose Properties. Click in the “Shortcut key” box, and type your preferred keyboard shortcut (I chose Ctrl-Alt-G).

Now you can open the service by pressing the keyboard shortcut you just entered. Once it opens, choose Upload in the top-left corner of the window, browse to and select the file, give it a name (or use the existing file name), and click Upload File.

Alternatively, you can copy the unique e-mail address Google doc generated for you under E-mail Your Documents and Files, open your e-mail program, paste the address in the To: field, and add any other recipients you want to send the file to. The file will be attached to the message automatically.

Google doc limits your HTML and text files (includingword’s *.doc and .rtf) to 500KB, presentations to 10MB from yourcomputer, and 2MB from a Web site (500KB as e-mail attachments), and spreadsheets to 1MB (spreadsheets can’t be uploaded as e-mail attachments).

I’ll keep looking for a way to add Google doc to my right-click menu (either via the Open With or Send To submenus, or directly on the context menu), and when I find it, I’ll let you know.

Making Windows XP Start 60% Faster Tutorial

Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This tutorial explores how to put these techniques to work.Stopping Unneeded Startup Services
Manual IP Addressing on Small Office/Home Networks
Disabling Recent Documents History
Disabling the Boot Logo
Removing Unwanted Fonts
Stopping Remote Assistance and Remote Desktop Sharing
Speeding Up the Dual-Boot Timeout
Speeding Up Your PPPoE Connection
Reducing the Wait Time
Automatically Killing Tasks on Shutdown

http://rapidshare.com/files/162527/Making_Windows_XP_Start_60.rar
password:newsgarden.net

Booting Windows XP with USB Flash Drive

Almost everyone who has worked with computers for any length of time at all has run into at least one situation in which a problem left a PC unbootable. What if you could return the machine to a bootable state just by inserting a USB flash drive though? Believe it or not, it is actually possible to install a bootable copy of Windows XP onto a flash drive and then boot a PC off of the flash drive. From there, you can use applications that you have installed on the flash drive (anti virus, anti spyware, disk repair, etc.) to fix the PC’s problem. In this article, I will show you how.

What’s the catch?

As with most cool new techniques, there are a few catches. For starters, not every PC is capable of booting from a USB flash drive. For the most part, computers manufactured within the last two years are generally able to boot from a flash drive. Older systems may require a BIOS update, or might not be able to boot from a flash drive at all.

Another catch is that not every flash drive will get the job done. The primary factors that limit your use of a particular flash drive are capacity and speed. Technically, speed isn’t really a limiting factor, but booting Windows will be painfully slow unless you use a flash drive that supports USB 2.0.

The flash drive’s capacity is actually a limiting factor though. Surprisingly though, there are size limits on both the upper and lower end. Your flash drive can’t be too large or too small. There isn’t really a documented minimal size for a flash drive. You just need something large enough to hold Windows XP and a few applications. As you probably know, Windows XP normally consumes over a gigabyte of disk space. Later I will show you how to use a free utility to trim the excess fat off of Windows XP and make it a whole lot smaller. Even so, I still recommend that your flash drive be at least a minimum of 256 MB in size.

As I mentioned, there is a maximum size for the USB flash drive that you can use. Currently, USB flash drives exist in sizes of up to 4 GB, and 8 GB flash drives are expected to be available by the end of the year. As nice as it would be to have 8 GB to play with, the flash drive that you use for this project can be no larger than 2 GB. The reason for this is because you will have to format the flash drive using the FAT-16 file system, which has a 2 GB limit. Presently, you are stuck using FAT-16 because most computers will not recognize a flash drive as being bootable if the drive is formatted with anything other than FAT-16.
Preparing your Windows installation CD

One of the requirements for creating our bootable USB flash drive is a WindowsService Pack 2 installation CD. If your Windows XP installation CD doesn’t already include Service Pack 2, then you will have to make a CD that includes Service Pack 2 through a technique called slipstreaming. XP with

Other requirements

In addition to your Windows XP installation CD, there are a couple of other things that you are going to need. For starters, you will need the HP USB Disk Storage Format Tool. You can download this tool for free.

Another utility that you are going to need is Bart’s Preinstalled Environment Bootable Live Windows CD / DVD, or BartPE for short. You can download this utility for free from the BartPE Web site.

In addition to the software requirements, you must verify that the PC that you will be using to create the Windows deployment has 1.5 GB of free hard diskWindows XP Service Pack 2. Prior to Service Pack 2, Windows XP sometimes had trouble interacting with USB storage devices. space (minimum) and supports booting from a USB device. I also strongly recommend that the PC be running

Formatting the flash drive

Now that you have all of the prerequisites taken care of, it’s time to actually start setting up our flash drive. The first step in doing so, as strange as it sounds, is to format the flash drive. Windows will actually let you format a flash drive in the same way that you format a floppy disk. However, formatting a flash drive in this way will not work for this project. Furthermore, using Windows to format a flash drive directly has been known to destroy some types of flash drives.

Instead, you must format the flash drive by using the HP USB Disk Storage Format Tool that you downloaded earlier. To do so, simply open the utility, select the device followed by the FAT file system option and click Start.

Once the device has been formatted, you must make it bootable. To do so, you must copy the BOOT.INI, NTLDR, and NTDETECT from the root directory of your PC’s boot drive to the flash drive. These files are hidden by default, so you will either have to configure Windows Explorer to show hidden files (including protected operating system files) or you will have to open a Command Prompt window and use the COPY command to copy the files.

If you choose to use the Windows Explorer method, then open Internet Explorer and enter C: into the address bar so that you are looking at your local hard drive. Next, select the Folder Options command from the Tools menu. When the Folder Options properties sheet opens, select the View tab. Now, just select the Show Hidden Files and Folders and deselect the Hide Extensions for Known File Types and the Hide Protected Operating System Files check boxes. Click OK to continue.

Booting from the USB flash drive

Now that you have formatted your USB flash drive and installed the boot files onto it, the next thing that you must do is to configure your PC to allow you to boot from the flash drive. This is all done through the computer’s BIOS Setup. I can’t give you specific instructions for this part, because every computer is different. I can give you a few pointers though.

You can access your computer’s BIOS by pressing a specific key immediately after you turn the PC on. The key varies, but it is usually either [F1], [F2], or [Delete]. Once you are in the BIOS Setup, you should verify that all of your computer’s USB options are enabled. This might include things like support for legacy USB devices or support for USB 2.0. If there is a time out setting for USB devices, you should set it to the max to insure that the system doesn’t time out while waiting on the USB device to boot.

Next, find the section on boot device priority. Normally, a USB flash drive (which is usually listed as USB-HDD, but may be listed as a removable device) will have a very low boot priority. If the USB flash drive’s boot priority is lower than the hard disk (listed as HDD) then the only time the computer would ever boot off of the USB flash drive is if the system were to fail to boot from the hard disk. You must therefore rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

Configuring Windows

Now that we have finally made it through all of the prep work, it’s time to start setting up Windows. As you have probably already guessed, the process of installing Windows to a flash drive is quite a bit different from your normal, run of the mill installation. There are a couple of reasons for this.

For starters, a full blown Windows XP deployment takes up over a Gigabyte of hard disk space. When you are installing to a flash drive, disk space is a scarce commodity. Even if you have over a Gigabyte of space on your flash drive, you probably don’t want to use it all on Windows. It would be nice to have room to install a few applications. Therefore, you need to trim the excess fat off of Windows.

The other reason why the installation process is so different from the usual Windows installation is because Windows Setup is not designed to install Windows to a flash drive. You therefore have to configure Windows using an alternate method.

The PEBuilder utility that you downloaded earlier can take care of both of these issues. PEBuilder is designed to create a build of Windows XP (or Windows Server 2003) that does not take up as much space as a full blown installation. Once you create this new build, you can copy it to the flash drive. For right now, I will show you how to create a basic Windows build and copy it to the memory stick. Unfortunately, it’s rather difficult to install applications once Windows is up and running. Therefore, after I show you how to create a basic Windows build, I will show you how to create a build that includes some applications.

Begin the process by opening PEBuilder. When you open PEBuilder, you will see a screen similar to the one that’s shown in Figure A. Simply enter the path to the Windows installation files (the ones from your Windows XP with Service Pack 2Windows build. installation CD). Next, verify that the Create ISO Image and the Burn to CD check boxes are not selected and then click the Build button. PEBuilder will now create the new

Now, it’s time to copy Windows to the flash drive. To do so, you will have to use a special batch file that’s included with PEBuilder. Open a Command Prompt window and navigate to c:\pebuilder313\plugin\peinst. Now, insert an empty flash drive into the computer’s USB port and then execute the file PEINST.CMD. You will now see a menu appear as shown in Figure B.

Type 1 and press [Enter] and you will be prompted to enter the path to the build that you have created. Enter C:\pebuilder313\BartPE. Now, type 2, press [Enter], and you will be prompted for the target path. Enter the drive letter that Windowsflash drive. After doing so, the menu is updated as shown in Figure C. The menu now displays the source path and the destination drive. Type 5 and press [Enter] to install Windows to the flash drive. has assigned to your USB

Installing applications

Now that I have shown you how to create and install a basic Windows build, I want to talk for a moment about how you can add an application to the build (prior to creating it). The PEBuilder program comes pre-configured to support a number of common Windows applications, but does not come with the applications themselves.

The reason why installing applications can be a little bit tricky is because most Windows applications modify the Windows registry. The build that you are creating is basically a collection of installation files, and the build itself does not contain a registry (the registry gets created when Windows is installed onto the flash drive). As such, PEBuilder uses a sort of registry emulator.

If you go to the C:\PEBUILDER313\PLUGIN folder, you will see sub folders for a number of different applications. If you open one of these application folders, you will see that the folder contains an INF file and a FILES folder. The INF file contains all of the information that would normally go into the registry, and the FILES folder stores all of the program’s files.

To see how this works, let’s install an application that I’m sure most of you are familiar with; Nero. Begin by installing Nero onto the machine that’s running PEBuilder, as if you planned to run Nero locally on that machine. When the installation completes, copy all of the files from C:\Program Files\ahead\Nero to C:\pebuilder313\plugin\nero burning rom\files. In this particular case, the nero burning rom folder is the folder that has been set aside for the Nero application. The Files sub folder is intended to store Nero’s system files.

Now, you must take care of Nero’s registry entries. To do so, go to the C:\pebuilder313\plugin\nero burning rom folder and open the PENERO.INF file using Notepad. As I explained earlier, the INF file in an application’s folder is used to store the application’s registry entries. For Nero and all of the other applications that PEBuilder predefines, the INF file is pre-configured. You just have to make a few changes that are specific to your system.

In this particular case, the PENERO.INF file is designed to support both Nero versions 5.x and 6.x. Initially, the lines for both versions are commented out. You must therefore determine which version you have and then remove the semi colon from the beginning of the lines that apply to that version. If you look at Figure D, you can see how the two versions are separated.

Once you uncomment the appropriate lines, just replace “Your Name”, “Your Company Name” and “Your Serial Number” with your name, your company’s name, and your Nero product key. Save the file, and your set to go. The next time that you click the Build button, Nero will be included in the build.

Putting XP in your pocket

Running Windows from a flash drive isn’t an exact science. Sometimes the process just doesn’t work and there is no good reason why. As more PCs start to support booting from USB devices though, USB boots should become more standardized, and the technique should become more reliable.